Kenmore 9083, 46-9083 Refrigerator Water Filter Replacement
Still running a Kenmore Coldspot 106 series, or a fridge that once called for the old 9020 or 9030 filter? Those codes have been retired, and the 9083 is what replaced them. It also happens to be the one Kenmore filter in this lineup built specifically to tackle PFOA and PFOS, chemicals most standard filters don't even test against.
Confirm You Need the 9083
| Part Number | Also Known As | Install Type | Best For |
|---|---|---|---|
| 9083, 46-9083 | EDR3RXD1, 4396710, 4396841, 9020, 9030 | Push-button eject | Kenmore side-by-side, Coldspot 106 series, and select Amana, Ikea, Maytag models |
| 9081, 46-9081 | EDR1RXD1 | Eject-and-slide | Standard Kenmore side-by-side, bottom, and top freezer |
| 9084, 46-9084 | — | Open-tray twist-out | Select Kenmore side-by-side models |
If your old filter is labeled 9020 or 9030 rather than 9083, don't worry, those are the discontinued codes this filter directly replaces.
Compatible Refrigerator Models
This filter's compatibility extends well past Kenmore's own badge:
- Kenmore side-by-side refrigerators
- Kenmore Coldspot 106 series refrigerators
- Select Amana refrigerators using the EDR3RXD1 filter
- Select Ikea, Jenn-Air, KitchenAid, Maytag, and Whirlpool refrigerators using the same code
Always confirm your model number before ordering. This list is representative, not exhaustive, across the full compatible range.
How This Filter Actually Helps
The 9083 is NSF 42, 53, and 401 certified, and the 401 tier is where it earns its keep here, reducing PFOA and PFOS by up to 99%. Those two compounds belong to a class of perfluorinated chemicals that have been showing up more frequently in municipal water testing across the country, and most standard refrigerator filters were never built or tested to address them at all. Alongside that, it also covers chlorine-resistant cysts like Cryptosporidium and Giardia, lead, and asbestos, giving it one of the broader contaminant profiles in Kenmore's entire lineup, not just among its own filter codes.
Kenmore 9083 vs 9081: PFOA/PFOS Coverage vs Standard Filtration
| Kenmore 9083 | Kenmore 9081 | |
|---|---|---|
| Install Type | Push-button eject | Eject-and-slide |
| Certification | NSF 42, 53, and 401 | NSF 42, 53, and 401 |
| PFOA/PFOS Reduction | Up to 99% | Not specified |
| Filter Capacity | 200 gallons with PID, 100 without | 200 gallons |
| Cross-Compatible | Amana, Ikea, Maytag, Whirlpool via EDR3RXD1 | Whirlpool via EDR1RXD1 |
| Best For | Coldspot 106 series and PFOA/PFOS-sensitive households | Standard Kenmore side-by-side and freezer models |
How Do I Check My Part Number?
Press the eject button on your current filter's housing, that push-button mechanism is a strong signal you're already dealing with a 9083-compatible housing. Confirm on the label from there. If it shows 9020, 9030, or EDR3RXD1 instead, that's still your filter, just under an older or cross-branded code.
What Happens If I Order the Wrong One?
A filter built for a different housing simply won't click into place when you push it in, the push-button mechanism either engages fully or it doesn't. That makes a wrong order here fairly low-risk in terms of hidden leaks, you'll know immediately rather than discovering a problem weeks later.
How Often Should You Replace This Filter?
Here's the detail that trips people up on the 9083 specifically: capacity depends on whether your refrigerator has a PID filter monitoring system. With PID, you're rated for 200 gallons. Without it, that drops to 100 gallons. Either way, plan on a replacement every 6 months regardless of which capacity applies, and check your refrigerator's user guide if you're unsure whether your model includes PID monitoring.
What Customers Say
"Had an old Coldspot with a 9030 filter that I couldn't find anywhere anymore. Turns out the 9083 was the direct replacement all along."
"PFOA and PFOS reduction was the deciding factor for us given some of the local water reports we'd seen."
"Push-button eject is genuinely the easiest filter swap I've done, no twisting, no tray."
Buy With Confidence
Free shipping across the USA 30 days to return it if it isn't the right one NSF 42, 53, and 401 certified, independently verified Fast processing so your dispenser is back to normal quickly
Installing Your Kenmore 9083 Filter
- Locate the filter housing inside the upper right area of the refrigerator compartment
- Press the eject button on the filter housing to release the old filter
- Pull the old filter straight out and discard it
- Remove the protective cap from the new 9083 filter
- Swap the decorative cap from the old filter onto the new one if your model requires it
- Push the new filter firmly into the housing until it clicks securely into place
- Run water through the dispenser to purge air from the line, then reset the filter indicator
Ready to Order?
Get one of the only Kenmore filters built to reduce PFOA and PFOS, priced below what you'd typically pay elsewhere.
Shop the Kenmore 9083 Water Filter Now from hive appliances
FAQs
Is the 9083 really a direct replacement for the old 9020 and 9030 filters?
Yes. Kenmore retired those two codes and the 9083 covers the same Coldspot 106 series and compatible side-by-side models they used to serve.
What does PID mean, and how do I know if my fridge has it?
PID refers to a product identification and filter monitoring system built into certain refrigerators. Check your model's user guide to confirm whether yours includes it, since it directly affects whether your filter is rated for 100 or 200 gallons.
Does the PFOA and PFOS reduction actually matter for my household?
It depends on your local water supply. These compounds have become more common in municipal water testing in recent years, so if your area has reported detections, a filter specifically tested against them offers protection most standard filters don't.
Is the 9083 really compatible with non-Kenmore refrigerators?
Yes. It shares the EDR3RXD1 filter code with select Amana, Ikea, Jenn-Air, KitchenAid, Maytag, and Whirlpool refrigerators.
Can I reuse the cap from my old filter?
Some models require swapping the decorative cap from your old filter onto the new cartridge. Check your specific refrigerator's installation guide to confirm whether this step applies to your unit.
What payment methods do you accept?
Hive Appliances accepts all major cards, Apple Pay, Google Pay, PayPal, and Shop Pay at checkout.